Phone charging port feels loose? Avoid this one mistake
A loose charging port is often caused by dust or a bad cable, not real damage, and using a pin to clean it can cause a short circuit
Images are not validated/verified
Smartphones today are used for calling, messaging, taking photos and gaming, making them an all-in-one gadget that is used through the day. The more a phone is used, the more often it needs charging. Many people then notice that the charging port becomes loose from constant charging. If your phone's port has become loose or the cable keeps slipping out, do not ignore it, because even a small mistake can prove costly.
The biggest reason a charging port becomes loose is dirt or dust collecting inside it. Fine bits of soil or threads from pocket fabric usually get stuck in the port, so the charging cable does not go in fully and the connection weakens. This makes a difference felt while plugging in the cable and causes trouble while charging. Because the cable no longer fits as tightly as before, many people assume the port itself has become loose, but the real problem lies in the dirt that has collected inside.
The fault does not always lie in the port itself. Often a damaged, worn out or low quality charging cable is the reason behind the problem. Such cables do not fit properly in the port, causing the charging to keep breaking off. So before concluding that the port is damaged, one should try using a good quality cable. If there is no problem after using a good cable, it means there was nothing wrong with the port in the first place.
Daily use can also affect the port to some extent. Repeatedly plugging the cable into the port and removing it gradually wears down the connector inside. Plugging the cable in forcefully or pulling it out at an angle can also damage the port completely. This problem is seen more often in older phones, meaning a phone that has been used for many years is more likely to face this trouble.
If dust or dirt has collected in the port, proper care is needed while cleaning it. A needle, pin or any other pointed object should not be used to clean the charging port, as this can damage the port. Using a pin, needle or pointed object also carries the risk of causing a short circuit.
